Basic Info.
Position of Pump Shaft
Horizontal
Overseas Warehouse
in Stock
Inflator Material
304 Stainless Steel
Specification
270(W)X630(H)/mm
Product Description
Camo compressor High Pressure hand pcp air pump air compressor 4500Pps
Highlight
· Competitive prices-----Factory to the retailer, without any distributors
· Fast delivery------ In stock local warehouse
· Quality & Quantity------ Mass production,CNC process
· Door-to-door service------ The seller is responsible for customs clearance management
· Lifetime warranty------ Free original repair spare parts provided to return.
Item Name: | hand pump | Brand Name: | pcp pump | Model: | |
Structure: | Piston Pump | Stage: | 3 | Usage: | Air Pump |
Max pressure: | 4500 Psi | Fuel: | hand | Pressure: | High Pressure,300bar |
Feature: | High Efficiency | Material: | stainless steel | G.W: | 3kgs |
Theory: | Reciprocating pump | Warranty: | 1 year | Configuration: | Portable |
Leak detection required after installation of new pump:
Testing: Use the plug and pluging the pipe to inflate to 20 mpa
when assembled observe the pressure gague after 10s to drop,-do not drop is not leaking, If leaking, then make the pump into water, observe the location of leaking.
Silicone oil and water cooled liquid considerations:
The air pump does not contain silicone oil, For air shipping sercu-rity reasons, oil can be purchased from local store , oil adding should appropriate, if too much it is easy to plug one-way valve water cooled liquid has been added, between 2 and 3 levels stage position, do not need add.
Low pressure on the vent when pressure down:
The operating principle of the pump: pulling up the second-level system, to the tertiary system pressure, the primary system intake. Because the outlet is not connected to the container, the second stage system pressure discharged directly through the third system, so the air vent volume is very small, it is ok.
1. Refueling
New pump, pressing after 8001500eS need refueling once. One place 3 drops of oil, add oil pressing 50 times, drain excess oil and water.
2. Female connector installation
Female connector should be properly installed, otherwise, it is easy to jam
3. Pressure relief
The air pressure must be vented, When not in use, try to keep the pump in the pressure-free state. Hose can't bend over, don't crash pressure gauge.
4.Water Cooling Principle Description
The water of the air-cooled barrel is between the secondary and tertiary tubes. The water has already been added. Sealed inside, no need to add. water-cooled conduction heat, not refrigeration. Fever is normal, indicating that heat is discharged to continue working.
1. One-way clearance
When used upward pull heavy, pressure gauge value rises when downward pressure. The pressure gauge decreases when the hand is loosened. This indicates that the one-way valve has sewage, or has been damaged. Solution: Check whether the valve sludge too much, if a serious rebound phenomenon, is a one-way valve to appear oily, or one-way valve damage. You need to clean up the one-way valve, Replace the valve seal ring or spring
2. Air Intake Clearance
Air pressure when the pump is inflated, press the hand when the vent, pulling out when not breathing. Reason: There are foreign bodies in the small holes in the middle of the hand. The intake ball cannot be returned to the sealing position. Solution: Disassemble the pump, remove the three-stage pole fixation bolt,
remove the air intake ball, clean the small holes and the ball. If the ball is damaged, replace it and install it back.
3. Pressure gauge damage
Pressure gauge does not return to zero: Reason: Excess oil is not cleaned. About20mpa oil and gas produce swelling, pressure instantly reaches 40mpa, pressure gauge exceeds load and then damage. Or the pressure gauge receives a severe shock causing a shift in the pointer, which requires replacing the pressure gauge.
A: The product warranty time is one year, if exceed one year warranty time, we will charge a certain part cost expense.
B: The warranty when the repair sent to the proper packing, if the transport process lost damage, we are irresponsible.
C: During free maintenance, if the following matters occur, we have the right to refuse service or charge related material fees, service fee:
1. Improper use of the operation caused product damage or product failure.
2. Arbitrarily disassemble the pump.3. Not the company's products.
D: Before installing the use of our products, please read our brochure carefully.
E : During warranty time, parts free charge, buyers pays hipping charge.
Address:
No. 19 Industry South Road , Pujiang, Chengdu, Sichuan, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Sporting Goods & Recreation, Tools & Hardware
Company Introduction:
Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price. Our business has a situation here - all of our customers are brand. They are famous and well accepted by local customer. They commit to their consumer value. They are loved by people and never fail their expectation. Although they could be all different, they have one thing in common - they work with us.
Over 10 years of experience working with brand, we know exactly what is important to you and consumer in the hunting industry. We want to see you success. We want to work for hero. For the last 6 years, this is always the value we sharing promotes growth believed in.